Gauge Syphons - U Type Syphons
AS-Schneider Gauge Syphons are used to protect the pressure gauge from the effect of hot pressure media such as steam and also to reduce the effect of rapid pressure surges. The syphon allows condensate to form and be collected inside the syphon, preventing the hot media (hot vapors, not just steam) from coming in direct contact with the pressure instrument. Also used as freeze protector when used with proper fill fluids.
The U Type Syphon is normally used for horizontal installations.
The Standard Syphons are designed, manufactured and tested according to DIN 16282. The standard pipe dimension is Ø 20 x 2.6 mm. 1/2" pipe (Ø 21.3 mm) dimensions are also available. AS-Schneider is also providing so-called Commercial Style Syphons. These types have a standard pipe dimension of Ø 21.3 x 3.2 mm – using threaded pipe connections instead of weld fittings.
The max. allowable (Working) Pressure (PS), as standard, is 160 bar (2,321 psi), however, depends on the wall thickness of the pipes used.
Productvariaties
| Inlet | Outlet | Dimension a (mm) | Material | References | Part Number 1 | Part Number 2 | Offerte |
|---|---|---|---|---|---|---|---|
| Butt Weld End Ø 20 x 2.6 | G 1/2 Adjusting Nut | 145 | 10345 | DIN 16282 Type B | S006.07.110 | S00607110 | |
| Butt Weld End Ø 20 x 2.6 | G 1/2 Adjusting Nut | 218 | 10345 | Single-plane Bend | S006.07.110.05 | S0060711005 | |
| Butt Weld End Ø 20 x 2.6 | G 1/2 Adjusting Nut | 145 | 10345 | Bended to the Right Side | S006.07.110.20 | S0060711020 | |
| Butt Weld End Ø 20 x 2.6 | G 1/2 Adjusting Nut | 145 | 14571 | DIN 16282 Type B | S006.07.210 | S00607210 | |
| Butt Weld End Ø 20 x 2.6 | G 1/2 Adjusting Nut | 218 | 14571 | Single-plane Bend | S006.07.210.05 | S0060721005 | |
| G 1/2 Male | G 1/2 Adjusting Nut | 180 | 10345 | DIN 16282 Type A, Rev. 11/1988 | S006.07.100 | S00607100 | |
| G 1/2 Male | G 1/2 Adjusting Nut | 253 | 10345 | Single-plane Bend | S006.07.100.05 | S0060710005 | |
| G 1/2 Male | G 1/2 Adjusting Nut | 180 | 14571 | DIN 16282 Type A, Rev. 11/1988 | S006.07.200 | S00607200 | |
| G 1/2 Male | G 1/2 Adjusting Nut | 253 | 14571 | Single-plane Bend | S006.07.200.05 | S0060720005 | |
| Butt Weld End Ø 20 x 2.6 | 1/2 NPT Female | 145 | 10345 | S006.07.110.18 | S0060711018 | ||
| Butt Weld End Ø 20 x 2.7 | 1/2 NPT Female | 145 | 14571 | S006.07.210.18 | S0060721018 | ||
| 1/2 NPT Male | 1/2 NPT Female | 180 | 10345 | S006.07.100.16 | S0060710016 | ||
| 1/2 NPT Male | 1/2 NPT Female | 180 | 14571 | S006.07.200.16 | S0060720016 | ||
| G 1/2 Male | G 1/2 Male | 14571 | S006.07.205.01 | S0060720501 | |||
| G 1/2 Male | G 1/2 Male | 10345 | S006.07.105.01 | S0060710501 | |||
| G 1/2 Male | G 1/2 Male | 10345 | Surface Treatment: Phosphatized | S006.07.105.12 | S0060710512 | ||
| G 1/2 Male | G 1/2 Adjusting Nut | 10345 | Surface Treatment: Phosphatized | S006.07.105.02 | S0060710502 |
Heeft u specifieke vragen over dit product?
Liever een persoonlijk gesprek? Bel 0162 - 31 42 85 of stuur een e-mail naar info@marktechnical.nl
