AS-Schneider Adapters, either ΔP to Static or ΔP to ΔP Adapters, are flanged to the 5 Valve Manifolds when more than one measurement on a single set of orifice taps is required. The ΔP to Static Adapter is designed to mount both a Static Transmitter and a Differential Pressure Transmitter. The ΔP to ΔP Adapter is designed to mount 2 Differential Pressure Transmitters, - typically for custody transfer or bi-directional flow applications. The vent connection is 1/4 NPT female, the ports are plugged by default.
The ΔP to Static adapter incorporates an isolation valve for the vent connection 1/4 NPT. If transmitters with 1/2 NPT male or female connection need to be assembled to the adapter a NPT Static Adapter (AKA-F# / AKA-M#) is available - to be ordered separately.
Bore Size: 3/8" (9.5 mm), to reduce or eliminate freezing issues.
Part N.: AKA-SSKD-1
|S||Adapter Design: ΔP - Static Adapter|
|S||Material: 1.4401 / 1.4404 / 316 / 316L|
|K||Abdichtung des Betätigungsorgans: O-Ring FKM|
|D||Seat Material: POM|
|1||Accessory Kit: In CS, Seal Ring in PTFE|
|NPT Static Adapter||Part Number - Carbon Steel||Part Number - Stainless Steel||Offerte|
|1/2 NPT Female||AKA-FC||AKA-FS|
|1/2 NPT Male||AKA-MC||AKA-MS|