3 Valve Manifolds T3A/T3S Type
AS-Schneider Soft Seated Direct Mount Manifolds T3A/T3S Type are designed for direct mounting to Differential Pressure Transmitters. The inlet connections (process connection), as standard, are 1/2 NPT female threaded. The standard 3 Valve Manifolds T3A/T3S Type have no vent connections. Accessory kits incl. washers are required for manifold to transmitter mounting, because the manifolds are provided with slotted bolt holes.
- Isolate Valves - 1/4" (6.35 mm) or 3/8" (9.5 mm)- Equalize Valves
- 0.138" (3.5 mm)The process to instrument connection is fully roddable due to the Cone Design Valve Seat of the Isolate Valves.
Part No.: T3S-SKA-1D
|T||T-Style Manifold - Thread x Flange|
|3||Quantity Bonnets: 3|
|S||Manifold Design - Bore Size Isolate Valves: 3/8" (9.5 mm)|
|S||Material: 1.4401 / 1.4404 / 316 / 316L|
|K||Stem Seal / Packing: O-Ring FKM|
|A||Seat Material: ETFE x POM|
|1||Accessory Kit: In CS - to mount Transmitters with Traditional Flange|
|D||Option: Dielectric Isolation|