HMP 09 - Turbine Flow Meters with Pelton Wheel - 3.0 up to 30 l/min

HMP 09 - Turbine Flow Meters with Pelton Wheel - 3.0 up to 30 l/min - Image 2

HMP 09 - Turbine Flow Meters with Pelton Wheel - 3.0 up to 30 l/min - Image 3

HMP 09 - Turbine Flow Meters with Pelton Wheel - 3.0 up to 30 l/min

The HM P (P for Pelton wheel) series turbine flow meter operates on the Pelton wheel turbine principle and is used to measure continuous and discontinuous volume flows. It is mainly used for cost-effective flow measurements in heating and cooling circuits. Even highly contaminated media at very high temperatures can be measured thanks to the special design and bearing concept.

Description
Downloads

The HM P (P for Pelton wheel) series turbine flow meter operates on the Pelton wheel turbine principle and is used to measure continuous and discontinuous volume flows. It is mainly used for cost-effective flow measurements in heating and cooling circuits. Even highly contaminated media at very high temperatures can be measured thanks to the special design and bearing concept.

Measuring Ranges 3.0 up to 30 l/min

Repeatability ±0.5 % (under the same conditions)

Linearity ±2.5 % of actual flow (viscosity 1 mm²/s)

Viscosity Range 0.8 up to 10 mm²/s

Materials

Housing: as per DIN 1.4305 [AISI 303].
Wheels: axle per DIN 1.4122
Bearing: Brass, Ceramics
Seals: FKM, graphite

Pressure up to 20 bar [290 psi].

Medium Temperature -60 °C to +350 °C [-76 °F up to +662 °F].

Product Documents

Datasheet

Datasheet