HM F - to supply intrinsically safe pickups and amplifiers

The HM F turbine flowmeter series (F for flange connections) is used to measure continuous and discontinuous flow rates. They are mainly used for lubricants and non-lubricants. They are particularly suitable for low and medium viscosity fluids such as water, emulsions, glycol mixtures and light oils.

The HM F turbine flowmeter series (F for flange connections) is used to measure continuous and discontinuous flow rates. They are mainly used for lubricants and non-lubricants. They are particularly suitable for low and medium viscosity fluids such as water, emulsions, glycol mixtures and light oils. The EWS feeds KEM pickups and amplifiers installed in hazardous areas and transmits the output frequency of these pickups. All input and output circuits are isolated. The EWS must be installed outside hazardous areas.

Technical Data

  • Outputs:
    • Open-Collector
    • PLC output active 24 V
    • NAMUR DIN 19234

Product Documents

Data

Other products

Flow Meters

TCMP 7900 - TRICOR Coriolis Mass Flow Meter - 7,900 kg/h [290 lb/min] DN15 [1/2"]

Kem Küeppers

ZHM KL - Gear Flow Meters with Ball Bearing for lubricating and non abrasive fluids - 0.02 to 1,000 l/min.

Kem Küeppers

ZHA KL - Gear Flow Meters Aluminum Version with ball bearing for lubricating media

Flow Meters

TCMP 065K - TRICOR Coriolis Mass Flow Meter - 65,000 kg/h [2,388 lb/min] DN50 [2"]

Flow Meters

TCMP 028K - TRICOR Coriolis mass flow meters - 28,000 kg/h [1,029 lb/min] DN25 [1"]

Kem Küeppers

SRZ KL - Helical Flow Meters with Ball Bearing for high-viscosity, not abrasiv media - 0.4 up to 400 l/min

Flow Meters

TCMP 230K - TRICOR Coriolis Mass Flow Meter - 230,000 kg/h [8,450 lb/min] DN80 [3"]

Kem Küeppers

HM Subsea - Turbine Flow Meters for Subsea Immersion Applications - 0.3 to 500 l/min