Monitoring risk factors helps to prevent damage to property. With the Mobeye CombiGuard (CM2600) you are aware of what's going on. With a temperature sensor, water leakage sensor, inputs for measuring battery voltage or potential-free sensors and with a mains adapter to monitor mains power, this is the most comprehensive Mobeye measuring device. The CombiGuard has an open collector output to switch a device. If desired, the bilge pump, air conditioner or heater will automatically turn on after an alarm, or remotely via an SMS command.
If you have no power supply on site, the Mobeye CombiGuard is eminently suitable. Due to its extremely economical design the Mobeye CM2600 works for a long time on a set of batteries. With normal use this is more than a year. The product is suitable to monitor all values, even the external battery voltage, at locations without an external power supply.
If a power source is available, we recommend connecting it. The device can then be accessed online, the batteries last longer and it also works directly as a power failure alarm. When used in a ship, the CM2600 monitors shore power.
The Mobeye CM2600 sends alarm messages by telephone call (max. 5 numbers), text message and/or e-mail. The receiver can "acknowledge" a call, preventing the other numbers from being called. The text messages contain the current temperature and battery voltage.
Specifications:
Features | - Temperature alarm (high/low) - Water Alarm - Battery voltage monitoring - 2x alarm input (NO/NC/AN) - (Wal) power failure alarm |
Alert | - Via call (max. 5 numbers) - By SMS, e-mail (unlimited number via Mobeye Portal) |
Additional posts | - Low battery voltage - (Missed) keep-alive |
Other settings | - Delay time on all alarm types - Temperature Limits - Limits for analog values - Repeat frequency of alarm - Identification text, alarm texts - Automatic on and off times |
Mobeye SIM Card (optional) |
- Inexpensive, flat-fee, multi-provider - Included, activate online |
Mobeye Internet Portal (optional) | - Alarm by text/call/email - Status display - On-line programming - Monitoring on keep-alive - Position display (Cell ID) |
Dimension | - 40x60x80 mm |
Power supply | - 2x CR123 (included), or - 12 VDC + 2x CR123 |
Factory calibration temperature sensor | - At 0.5°C between -30°C and +50°C, 1°C outside these values |
Battery life | - 1 year (battery powered) - 3 years (externally powered) |
Accessories (optional) | - Extension cable sensors, power adapter |
GSM | - 2G Quad band EGSM |