Gauge Cocks Male Thread x Adjusting Nut

AS-Schneider Gauge Cocks are basically designed, manufactured and tested according to DIN 16261, DIN 16262 and DIN 16263. According to above standards the cocks are applicable for a max. allowable (Working) Pressure (PS) of 6 – 16 bar (87 - 232 psi) and a max. allowable Temperature (TS) of 50°C (122°F) for liquids, gas or vapors. Originally the AS-Schneider Gauge Cocks were designed for a max. allowable (Working) Pressure (PS) of 25 bar (363 psi) for the G 1/2 models.

Operating Positions are marked on top of the plug.

Productvariaties

Inlet	Outlet	Material	PN	L	H	Hex	Test Connection	References	Part Number 1	Part Number 2
G 1/4 Male	G 1/4 Adjusting Nut	Brass	6	55	30	17		DIN 16262 Type B	S003.42.000	S00342000
G 1/2 Male	G 1/2 Adjusting Nut	Brass	25	80	57	27		DIN 16262 Type A	N003.30.000	N00330000
G 1/2 Male	G 1/2 Adjusting Nut	Brass AP*	25	80	57	27			S003.30.000.32	S0033000032
G 1/2 Male	G 1/2 Adjusting Nut	1.4571	25	83	57	27		DIN 16262 Type A	S003.30.200	S00330200
G 1/2 Male	G 1/2 Adjusting Nut	Brass	25	80	57	27	M 20 x 1,5 c/w Protective Cap	DIN 16263 Type A	N003.31.000	N00331000
G 1/2 Male	G 1/2 Adjusting Nut	Brass AP*	25	80	57	27	M 20 x 1,5 c/w Protective Cap		S003.31.000.32	S0033100032
G 1/2 Male	G 1/2 Adjusting Nut	14571	25	83	57	27	M 20 x 1,5 c/w Protective Cap	DIN 16263 Type A	S003.31.200	S00331200
G 1/2 Male	G 1/2 Adjusting Nut	Brass	25	80	57	27	Test Flange 60 x 25 x 10		N003.36.000	N00336000
G 1/2 Male	G 1/2 Adjusting Nut	Stainless Steel	25	83	57	27	Test Flange 60 x 25 x 11		S003.36.200	S00336200
G 1/2 Male	G 1/2 Adjusting Nut	Brass	25	80	57	27	Test Flange Ø 40 x 5		N003.38.000	N00338000
M 20 x 1,5 Male	M 20 x 1,5 Adjusting Nut	Brass	25	80	57	27			N003.30.050	N00330050
M 20 x 1,5 Male	M 20 x 1,5 Adjusting Nut	Brass	25	83	57	27	M 20 x 1,5 c/w Protective Cap		N003.31.050	N00331050
M 20 x 1,5 Male	M 20 x 1,5 Adjusting Nut	1.4571	25	83	57	27	M 20 x 1,5 c/w Protective Cap		S003.31.250	S00331250